PO Directional Valves
Description
Technical Features
Symbol
Cross Section
Cavity Details
88
VH023
All external surfaces are corrosion protected.
All valve parts are made of high strength steel.
Spool and cage are hardened and super-nished
to ensure minimal wear and extended service
life.
Industry commonly used hybrid cavity.
A 3 way 2 positions, spool type, direct acting,
screw-in hydraulic, directional cartridge valve.
The DVC0.S08 allows flow from 2 to 3. Once suf-
cient pressure is applied on port 1, the spool
lifts allowing free flow from 1 to 2 while blocking
port 3. The rigid design using a 1-piece body
contributes to minimize the effect of eccentrici-
ties in cavity and provides great reliability. Low
pressure drop thanks to optimized flow path.
Hybrid SAE Cartridge - 200 bar
Directional valve - 3/2 spool type
DVC0.S08 Valve Series
Technical Data
Performance Details
Flow (l/min)
Pressure (bar)
89
Specication may change without notice.
Ordering Code
Note: The performan-
ce chart illustrates flow
handling capacity 2 to 3 and
1 to 2
p/Q curves are recorded at
TOil = 40°C and 46 cSt
Maximum operating pressure 200 bar
Maximum flow 20 l/min
Maximum Internal leakage 200 cm
3
/ min @ 200 bar
External component treatment Oxide burnished
O-ring Temperature Range -30° C to 110° C (standard sealing NBR - BUNA-N)
Oil Temperature Range -30° C to 110° C
Fluids Mineral - based or synthetics with lubricating properties
Viscosities 7,4 to 420 cSt
Filtration 20/18/15 ISO 4406 (maximum ltration admitted)
Orientation No restrictions
Installation torque 40 - 45 Nm
Technical Specications for characterization see page 480
Oil testing condition ISO VG 46 cSt
Seal kit code SK.062
Weight 0,090 kg
